Characteristics

  Description

Smooth, adjustable, clean sliding for any surfaces.
No matter what kind of material has to be cut with an angle grinder, the quality of the edge, the perpendicularity of the cut, safety, and quality of the edge always remain relevant.

The AirSLIDER device for 115-125 angle grinder turns any angle grinder into a mini-machine.
The device is easy to install on the regular cover of any angle grinder.
A sole with a plastic lining gives control to the cutting, does not damage the surface of the material. Provides perpendicular cut.
The design allows adjusting the depth of the cut.

The device provides increased reliability and safety when working with different blades. A vacuum cleaner is connected to the nozzle.
Works on various materials: ceramic tile, granite, laminated flooring, wood, metal and many other surfaces.
Fits angle grinders 115 and 125 mm, any model and manufacturer.

  Characteristics

  Description

Removal of dust from angle grinder. Universal fastening, suitable for ALL angle grinders.
Open construction “Aero”: Works even with LOW-POWER vacuum cleaners, active blade cooling, visual control of cutting zone.

  Characteristics

  Description

Adjust the depth and cut without dust!
AirCHASER 115-125 2.0 makes the grooves in the walls, ceilings, in which electrical wires and cables are placed. There is no need to purchase an expensive wall chaser machine.

New version 2.0 of has improved mounting system – the device is easily and quickly installed on both 125- and 115-mm angle grinder.

The device has ergonomic clamping knobs for adjusting and fixing the depth.
The accessory has a remote washer and a clamping nut, allowing you to install two blades at once. The width of the groove is 12 mm.

  Characteristics

  Description

Clean 45 Cutting ceramic tiles with an angle grinder goes with a lot of dust. Especially, a lot of dust is appeared when cutting ceramic tiles at an angle of 45 degrees, because more material is removed.
The device for angle grinder DUSTER 45 completely solves the problem of dust removal, almost all the dust goes into the vacuum cleaner. In addition to removing dust, the device has two other huge advantages:
-The system moves on a plastic support. There is no need to hold the angle grinder on weight for a long time, which relieves the hand. Much more work can be done without tiredness.
-The accessory pipe has a window that allows visually control the cutting process and be sure that the process is going as it should.

Tile grinding with the DUSTER 45 will be clean, comfortable and controlled.
The DUSTER 45 is universal. Adjustable for any 115, 125 angle grinders.

  Characteristics

  Description

  Characteristics

  Description

The AirCHASER 230 is designed for cutting strobe for electrical wiring, water supply, sewage in concrete, brick and other surfaces.

- The universal mounting system allows easily install the accessory attachment on the angle grinder of any model and any manufacturer.
- It has an adjustable cutting depth.
- Plastic wheels ensure smooth movement on the surface.
- Aerodynamic system and brush seal effectively remove dust from the cutting area.
- Open design provides a full view of the cutting zone, cooling the blade.
- Lightweight in comparison with the existing wall chaser machines greatly facilitate the work.
- Strong metal and stiffening ribs make the structure rigid and reliable.
- The rubber tube allows to connect vacuum cleaners from various manufacturers.